Vessel
气动螺丝刀扭矩控制
Air Screwdrivers Torque Control
气动马达收紧非常快速
Air motor tightens really fast
扭矩控制气动螺丝刀,减少型
Torque Control Air Screwdriver, Reduced Type
标准螺钉
Standard screw
2~2.5mm
当扭矩达到设定值时,空气自动关闭。
Air is automatically shut out when torque reaches a set value.
No. GT-S4TFG
球彈簧固定器
Ball spring retainer
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring
 
 
No. GT-S4TG
球彈簧固定器
Ball spring retainer
调整刻度盘
Adjust dial type
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring Hose Coupling(1/8")
 
标准螺钉
Standard screw
2.2~3mm
当扭矩达到设定值时,空气自动关闭。
Air is automatically shut out when torque reaches a set value.
No. GT-S4TFS
球弹簧固定器
Ball spring retainer
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring
 
 
No. GT-S4TS
球弹簧固定器
Ball spring retainer
调整刻度盘
Adjust dial type
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring Hose Coupling(1/8")
 
标准螺钉
Standard screw
3~4mm
当扭矩达到设定值时,空气自动关闭。
Air is automatically shut out when torque reaches a set value.
No. GT-S4TFR
球弹簧固定器
Ball spring retainer
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring
 
 
No. GT-S4TR
球弹簧固定器
Ball spring retainer
调整刻度盘
Adjust dial type
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring Hose Coupling(1/8")
 
型号
Model No.
容量
标准螺钉(mm)
Capacity
Standard Screw
扭矩范围(N.m)
Torque Range
无负载速度(rpm)
No Load Speed
耗气量(m3/min)
Air Consumption
软管接头
Hose Coupling
总体长度(mm)
Overall Length
重量(g)
Weight
配件 EDP No.
BitPlug
GT-S4TFG 2.0~2.5 0.3~0.8 2,300 0.28 RC 1/8 215 565 B36 ⛒2X70H 311206
GT-S4TFS 2.2~3.0 0.5~1.3 1,700 0.28 RC 1/8 215 555 B36 ⛒2X70H 311205
GT-S4TFR 3.0~4.0 0.7~2.1 1,100 0.28 RC 1/8 215 565 B36 ⛒2X70H 311204
GT-S4TG 2.0~2.5 0.3~0.8 2,300 0.28 RC 1/4 215 650 A14 ⛒2X65G BPB—2 311203
GT-S4TS 2.2~3.0 0.5~1.3 1,700 0.28 RC 1/4 215 640 A14 ⛒2X65G BPB—2 311202
GT-S4TR 3.0~4.0 0.7~2.1 1,100 0.28 RC 1/4 215 650 A14 ⛒2X65G BPB—2 311201
  • Air pressure: 0.6MPa
  • Air hose diameter: 6.35mm
  • Overall length: Accessories and hanger parts not included.
  • Weight: Accessories not included.
  • Capacity is listed as instant reference and depends on operation conditions.
留意一点
扭矩弹簧变化
Torque Spring Change
GT-S4T/S5T系列只需更换可选的扭矩弹簧即可轻松调节扭矩范围。调整时,螺钉紧固扭矩值应在扭矩范围的中心。另外,我们建议您在需要更快的紧固时选择更大的无负载速度类型。

GT-S4T/S5T series are easy to adjust torque range only by replacing optional torque spring. Torque value of screw fastening should be in the center of the torque range when adjusted. Also we will recommend you to choose larger No Load Speed type when faster fastening is necessary.
气动螺丝刀扭矩控制
Air Screwdrivers Torque Control
扭矩控制气动螺丝刀,减少型
Torque Control Air Screwdriver, Reduced Type
标准螺钉
Standard screw
2~2.5mm
当扭矩达到设定值时,空气自动关闭。
Air is automatically shut out when torque reaches a set value.
No. GT-S4TFG
球彈簧固定器
Ball spring retainer
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring
 
No. GT-S4TG
球彈簧固定器
Ball spring retainer
调整刻度盘
Adjust dial type
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring Hose Coupling(1/8")
 
标准螺钉
Standard screw
2.2~3mm
当扭矩达到设定值时,空气自动关闭。
Air is automatically shut out when torque reaches a set value.
No. GT-S4TFS
球弹簧固定器
Ball spring retainer
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring
 
No. GT-S4TS
球弹簧固定器
Ball spring retainer
调整刻度盘
Adjust dial type
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring Hose Coupling(1/8")
 
标准螺钉
Standard screw
3~4mm
当扭矩达到设定值时,空气自动关闭。
Air is automatically shut out when torque reaches a set value.
No. GT-S4TFR
球弹簧固定器
Ball spring retainer
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring
 
No. GT-S4TR
球弹簧固定器
Ball spring retainer
调整刻度盘
Adjust dial type
推动启动类型/降噪器/后排气
Push startup type/Noise reducer/Rear exhaust
Torque Spring Hose Coupling(1/8")
 
型号
Model No.
容量
标准螺钉(mm)
Capacity
Standard Screw
扭矩范围(N.m)
Torque Range
无负载速度(rpm)
No Load Speed
耗气量(m3/min)
Air Consumption
软管接头
Hose Coupling
总体长度(mm)
Overall Length
重量(g)
Weight
配件 EDP No.
BitPlug
GT-S4TFG 2.0~2.5 0.3~0.8 2,300 0.28 RC 1/8 215 565 B36 ⛒2X70H 311206
GT-S4TFS 2.2~3.0 0.5~1.3 1,700 0.28 RC 1/8 215 555 B36 ⛒2X70H 311205
GT-S4TFR 3.0~4.0 0.7~2.1 1,100 0.28 RC 1/8 215 565 B36 ⛒2X70H 311204
GT-S4TG 2.0~2.5 0.3~0.8 2,300 0.28 RC 1/4 215 650 A14 ⛒2X65G BPB—2 311203
GT-S4TS 2.2~3.0 0.5~1.3 1,700 0.28 RC 1/4 215 640 A14 ⛒2X65G BPB—2 311202
GT-S4TR 3.0~4.0 0.7~2.1 1,100 0.28 RC 1/4 215 650 A14 ⛒2X65G BPB—2 311201
  • Air pressure: 0.6MPa
  • Air hose diameter: 6.35mm
  • Overall length: Accessories and hanger parts not included.
  • Weight: Accessories not included.
  • Capacity is listed as instant reference and depends on operation conditions.
留意一点
扭矩弹簧变化
Torque Spring Change
GT-S4T/S5T系列只需更换可选的扭矩弹簧即可轻松调节扭矩范围。调整时,螺钉紧固扭矩值应在扭矩范围的中心。另外,我们建议您在需要更快的紧固时选择更大的无负载速度类型。

GT-S4T/S5T series are easy to adjust torque range only by replacing optional torque spring. Torque value of screw fastening should be in the center of the torque range when adjusted. Also we will recommend you to choose larger No Load Speed type when faster fastening is necessary.

标准螺钉 4~5mm 标准螺钉 5~6mm 标准螺钉 6~8mm 标准螺钉 8~10mm 标准螺钉 5~6mm 标准螺钉 2.6~3.5mm 标准螺钉 3.5~4.5mm 标准螺钉 3~4mm 标准螺钉 4~5mm 标准螺钉 5~6mm 标准螺钉 4~5mm 标准螺钉 6~8mm 标准螺钉 8~10mm 标准螺钉 2~2.5mm 标准螺钉 2.2~3mm 标准螺钉 3~4mm 标准螺钉 2.5~3mm 标准螺钉 3~4mm 标准螺钉 4~5mm 标准螺钉 4.5~6mm
紧凑,轻便,高转速电机。用于回收设备,小框格框架等。 稳定的紧固性能和高功率。用于建筑,外墙,住宅建筑等的框格框架。 强大的扭矩力,用于安装零件,紧固混凝土螺钉等。 用于施工高功率型号。 减速型气动螺丝刀 紧凑,轻巧,静音的齿轮减速机制。 稳定的紧固性能和高功率。用于安装电气部件。 小巧轻便。装配厂的基本型号。 角度冲擊螺絲刀。 强大的扭矩力。出色的耐用性 高功率型号。 用于安装各种零件。 当扭矩达到设定值时,空气自动关闭。 结合了冲击和扭矩控制系统提供了出色的可操作性。
No. GT-S4.5XD
No. GT-P4.5XD
No. GT-S6LXD
No. GT-P60XD
No. GT-P80XD
No. GT-P6EXD
No. GT-H4RC
No. GT-H5RC
No. GT-H4R
No. GT-H5R
No. GT-S4.5DR
No. GT-P5LS
No. GT-PLHⅡ
No. GT-P6HS
No. GT-PLRC
No. GT-S6.5D
No. GT-P8D
No. GT-S4TFG
No. GT-S4TFS
No. GT-S4TFR
No. GT-S5TFG
No. GT-S5TFB
No. GT-S5TFR
No. GT-S5TS
No. GT-PLXD
No. GT-P5XD
No. GT-P6LXD
No. GT-S60XD
 
No. GT-H4PR
No. GT-H5P
No. GT-P4.5DR
No. GT-PLP
No. GT-P6LSⅢ
No. GT-S6MLR
 
No. GT-P6.5D
 
No. GT-S4TG
No. GT-S4TS
No. GT-S4TR
No. GT-S5TG
No. GT-S5TB
No. GT-S5TR
 
No. GT-PLIXD
No. GT-PLR
No. GT-PLZ
No. GT-S6HS