Vessel
No. GT-P5XD 气动螺丝刀 Oil Xtra 系列

我们开发了"Oil Extra"系列产品,在冲击部件单元中填充油及空气管排气模型,旨在降低噪音和振动。
我们各种气动螺丝刀,可实现高效率工作。

A wide variety of air screwdrivers for high efficiency work. We have developed products such as "Oil Extra" series which is filled with oil in the impact part unit, as well as air tube exhaust models, aiming at reducing noise and vibration.

No. GT-P5XD
气动螺丝刀
冲击机制充满润滑油。除了将冲击声变得更柔和,声音更平滑,更防止因摩擦造成零件损坏。

Air Screwdrivers
The impact mechanism is filled with lubricating oil. In addition to changing the impact noise to a softer, smoother sound, the oil prevents part damage due to friction.
标准螺钉 4~5mm 紧凑,轻便,高转速电机。用于回收设备,小框格框架等。
Standard screw 4~5mm Compact, lightweight and high revolution motor. For recycle plant, small sash frame, etc.
No. GT-S4.5XD
钻头套筒固定器
Bit sleeve retainer
降噪器
Noise reducer
No. GT-PLXD
钻头套筒固定器
Bit sleeve retainer
调整刻度盘
Adjust dial
降噪器
Noise reducer
No. GT-PLIXD
钻头套筒固定器
Bit sleeve retainer
调整刻度盘
Adjust dial
用空气管抑制噪音
Suppress noise with air tube
降噪器
Noise reducer
No. GT-P4.5XD
钻头套筒固定器
Bit sleeve retainer
降噪器 / 后排气
Noise reducer / Rear exhaust
No. GT-P5XD NEW
钻头套筒固定器
Bit sleeve retainer
降噪器 / 后排气
Noise reducer / Rear exhaust
 
标准螺钉 5~6mm 稳定的紧固性能和高功率。用于建筑,外墙,住宅建筑等的框格框架。
Standard screw 5~6mm Compact, Stable tightening performance with high power. For sash frame for building, exterior, home building, etc.
No. GT-S6LXD
钻头套筒固定器
Bit sleeve retainer
调整刻度盘
Adjust dial
降噪器
Noise reducer
No. GT-P6LXD
钻头套筒固定器
Bit sleeve retainer
降噪器 / 后排气
Noise reducer / Rear exhaust
No. GT-P5XD 气动螺丝刀 Oil Xtra 系列

我们开发了"Oil Extra"系列产品,在冲击部件单元中填充油及空气管排气模型,旨在降低噪音和振动。
我们各种气动螺丝刀,可实现高效率工作。

A wide variety of air screwdrivers for high efficiency work. We have developed products such as "Oil Extra" series which is filled with oil in the impact part unit, as well as air tube exhaust models, aiming at reducing noise and vibration.

No. GT-P5XD
气动螺丝刀
冲击机制充满润滑油。除了将冲击声变得更柔和,声音更平滑,更防止因摩擦造成零件损坏。

Air Screwdrivers
The impact mechanism is filled with lubricating oil. In addition to changing the impact noise to a softer, smoother sound, the oil prevents part damage due to friction.
标准螺钉 4~5mm 紧凑,轻便,高转速电机。用于回收设备,小框格框架等。
Standard screw 4~5mm Compact, lightweight and high revolution motor. For recycle plant, small sash frame, etc.
No. GT-S4.5XD
钻头套筒固定器
Bit sleeve retainer
降噪器
Noise reducer
No. GT-PLXD
钻头套筒固定器
Bit sleeve retainer
调整刻度盘
Adjust dial
降噪器
Noise reducer
No. GT-PLIXD
钻头套筒固定器
Bit sleeve retainer
调整刻度盘
Adjust dial
用空气管抑制噪音
Suppress noise with air tube
降噪器
Noise reducer
No. GT-P4.5XD
钻头套筒固定器
Bit sleeve retainer
降噪器 / 后排气
Noise reducer / Rear exhaust
No. GT-P5XD NEW
钻头套筒固定器
Bit sleeve retainer
降噪器 / 后排气
Noise reducer / Rear exhaust
标准螺钉 5~6mm 稳定的紧固性能和高功率。用于建筑,外墙,住宅建筑等的框格框架。
Standard screw 5~6mm Compact, Stable tightening performance with high power. For sash frame for building, exterior, home building, etc.
No. GT-S6LXD
钻头套筒固定器
Bit sleeve retainer
调整刻度盘
Adjust dial
降噪器
Noise reducer
No. GT-P6LXD
钻头套筒固定器
Bit sleeve retainer
降噪器 / 后排气
Noise reducer / Rear exhaust
型号
Model No.
容量
Capacity
(mm)
无负载速度
No Load Speed
(rpm)
耗气量
Air Consumption
(m3/min)
软管接头
Hose Coupling
总体长度
Overall Length
(mm)
重量
Weight
(g)
配件EDP No.
标准螺钉
Standard Screw
自攻螺钉
Tapping Screw
木螺钉
Wood Screw
螺栓
Bolt
 
GT-S4.5XD4.0~5.03.5~4.02.7~3.54.0~5.014,5000.2 G 1/4 188 585A14 ⛒2X65G BPN-2F 311085
GT-P4.5XD4.0~5.03.5~4.02.7~3.54.0~5.014,0000.2 RC 1/4 170 735A14 ⛒2X65G BPB-2 311089
GT-PLXD 4.0~5.03.8~4.23.3~3.84.0~5.011,0000.35G 1/4 198.5670A14 ⛒2X65G BPN-2F 311113
GT-P5XD 4.0~5.03.5~4.03.3~3.84.0~5.011.0000.33RC 1/4 172 790A14 ⛒2X65G BPB-2 311100
GT-PLIXD 4.0~5.03.8~4.23.3~3.84.0~5.07.300 0.29G 1/4 198 740A14 ⛒2X65G BPN-2F Tube fitting PLB-O2 311114
GT-S6LXD 5.0~6.04.0~4.53.6~4.15.0~6.012,0000.4 G1/4 212 815A14 ⛒2X65G BPN-2F 311115
GT-P6LXD 5.0~6.04.0~4.53.6~4.15.0~6.012.5000.45RC 1/4 184 876A14 ⛒2X65G BPB-2 311116
  • Air pressure: 0.6MPa *Air hose diameter: 6.35mm *Overall length and Weight: Accessories not included.
  • Capacity is listed as instant reference and depends on operation conditions.
  • w/Rotary parts oil (VG-10). Impact parts oil (VG-32)
日本的标准型
以下选项可用
S4.5XD
P4.5XD
PLXD
S6LXD
P6LXD
P5XD
日本的标准型
 
 
以下选项可用
S4.5XD
P4.5XD
PLXD
S6LXD
P6LXD
P5XD

标准螺钉 4~5mm 标准螺钉 5~6mm 标准螺钉 6~8mm 标准螺钉 8~10mm 标准螺钉 5~6mm 标准螺钉 2.6~3.5mm 标准螺钉 3.5~4.5mm 标准螺钉 3~4mm 标准螺钉 4~5mm 标准螺钉 5~6mm 标准螺钉 4~5mm 标准螺钉 6~8mm 标准螺钉 8~10mm 标准螺钉 2~2.5mm 标准螺钉 2.2~3mm 标准螺钉 3~4mm 标准螺钉 2.5~3mm 标准螺钉 3~4mm 标准螺钉 4~5mm 标准螺钉 4.5~6mm
紧凑,轻便,高转速电机。用于回收设备,小框格框架等。 稳定的紧固性能和高功率。用于建筑,外墙,住宅建筑等的框格框架。 强大的扭矩力,用于安装零件,紧固混凝土螺钉等。 用于施工高功率型号。 减速型气动螺丝刀 紧凑,轻巧,静音的齿轮减速机制。 稳定的紧固性能和高功率。用于安装电气部件。 小巧轻便。装配厂的基本型号。 角度冲擊螺絲刀。 强大的扭矩力。出色的耐用性 高功率型号。 用于安装各种零件。 当扭矩达到设定值时,空气自动关闭。 结合了冲击和扭矩控制系统提供了出色的可操作性。
No. GT-S4.5XD
No. GT-P4.5XD
No. GT-S6LXD
No. GT-P60XD
No. GT-P80XD
No. GT-P6EXD
No. GT-H4RC
No. GT-H5RC
No. GT-H4R
No. GT-H5R
No. GT-S4.5DR
No. GT-P5LS
No. GT-PLHⅡ
No. GT-P6HS
No. GT-PLRC
No. GT-S6.5D
No. GT-P8D
No. GT-S4TFG
No. GT-S4TFS
No. GT-S4TFR
No. GT-S5TFG
No. GT-S5TFB
No. GT-S5TFR
No. GT-S5TS
No. GT-PLXD
No. GT-P5XD
No. GT-P6LXD
No. GT-S60XD
 
No. GT-H4PR
No. GT-H5P
No. GT-P4.5DR
No. GT-PLP
No. GT-P6LSⅢ
No. GT-S6MLR
 
No. GT-P6.5D
 
No. GT-S4TG
No. GT-S4TS
No. GT-S4TR
No. GT-S5TG
No. GT-S5TB
No. GT-S5TR
 
No. GT-PLIXD
No. GT-PLR
No. GT-PLZ
No. GT-S6HS