Vessel
气动微型磨床(表面磨削/抛光)
Air Micro Grinders (Surface Grinding/Polishing)
No. GT-MG25-12CF
软握把 Soft Grip
25,000 rpm
GT-MG25-12CF
Corner attachment
 
No.GT-MG35-12CC(Precision grinding at 35,000 rpm)
 
No.GT-MG25-12CC(Precision grinding at 25,000 rpm)
No. GT-MG25-9CF
软握把 Soft Grip
25,000 rpm
GT-MG25-9CF
Corner attachment
 
No.GT-MG25-9CC(Precision grinding at 25,000 rpm)
 
No.GT-MG35-9CC(Precision grinding at 35,000 rpm)
型号
Model No.
空载转速(rpm)
No Load Speed
耗气量(m3/min)
Air Consumption
软管接头
Hose Coupling
空气软菅内径
Air Hose Inner Dia.(mm)
总体长度(mm)
Overall Length
框架直径(mm)
Frame Dia.
重量(g)
Weight
刀尖附件尺寸
Tip Tool attachment size
配件 EDP No.
GT-MG25-12CF 25,000 0.25 Rc 1/4 6.35 181 24.5 315 M7
•Chuck handle •Oil •Rubber holder •PO-ring (#60.100.150.240 3pcs. each #400.600 1pc each) •Lap ring (#600 1pc) •Headcup (#80 1pc)
310776
GT-MG25-9CF 25,000 0.25 Rc 1/4 6.35 173 24.5 310 M7 310775
GT-MG25-12CR 25,000 0.16 Rc 1/4 6.35 160 20.0 200 M7 310762
GT-MG25-9CR 25,000 0.16 Rc 1/4 6.35 143 20.0 200 M7 310761
  • Working air pressure: 0.6MPa
  • Overall length: Accessories and exhaust hose parts not included.
  • Weight: Accessories not included.
  • In the main body, a 1.5m air intake hose, exhaust hose and a hose joint are attached.
  • [OP] Should be replaced at our factory.
光滑表面研磨抛光用顶尖工具
Tip tool for Smooth Surface Grinding and Polishing
从制造金属模塑时去除刀具痕迹,达到镜面精加工的目的
To meet work objectives from the removal of cutter marks when manufacturing metal molding, to the finishing of mirror surfaces
No. HC-80 Headcup
Model No. Grit
#
Inner Ctn. EDP No.
HC-80 80 10 622205
No. RH-30 Rubber Holder
Model No. Inner Ctn. EDP No.
RH-30 10 622305
No. PR PO-Ring
Model No. Grit
#
Inner Ctn. EDP No.
PR-60 60 100622005
PR-100100100622007
PR-150150100622009
PR-240240100622011
PR-400400100622013
PR-600600100622015
No. LP Lap Ring
Model No. Grit
#
Inner Ctn. EDP No.
LP-320 320 30622105
一点注意
角附件更换头
Corner Attachment Replacement Heads
提供一系列具有不同头部形状和齿轮比的角部附件。
VESSEL将根据您的需求更换微型磨床头。
A selection of corner attachments with differing head shapes and gear ratioses is available.
VESSEL will replace the micro grinder heads in accordance with your needs.
replacement head
replacement head
 
气动微型磨床(表面磨削/抛光)
Air Micro Grinders (Surface Grinding/Polishing)
No. GT-MG25-12CF
软握把 Soft Grip
25,000 rpm
GT-MG25-12CF
Corner attachment
 
No.GT-MG35-12CC(Precision grinding at 35,000 rpm)
 
No.GT-MG25-12CC(Precision grinding at 25,000 rpm)
No. GT-MG25-9CF
软握把 Soft Grip
25,000 rpm
GT-MG25-9CF
Corner attachment
 
No.GT-MG25-9CC(Precision grinding at 25,000 rpm)
 
No.GT-MG35-9CC(Precision grinding at 35,000 rpm)
型号
Model No.
空载转速(rpm)
No Load Speed
耗气量(m3/min)
Air Consumption
软管接头
Hose Coupling
空气软菅内径
Air Hose Inner Dia.(mm)
总体长度(mm)
Overall Length
框架直径(mm)
Frame Dia.
重量(g)
Weight
刀尖附件尺寸
Tip Tool attachment size
配件 EDP No.
GT-MG25-12CF 25,000 0.25 Rc 1/4 6.35 181 24.5 315 M7
•Chuck handle •Oil •Rubber holder •PO-ring (#60.100.150.240 3pcs. each #400.600 1pc each) •Lap ring (#600 1pc) •Headcup (#80 1pc)
310776
GT-MG25-9CF 25,000 0.25 Rc 1/4 6.35 173 24.5 310 M7 310775
GT-MG25-12CR 25,000 0.16 Rc 1/4 6.35 160 20.0 200 M7 310762
GT-MG25-9CR 25,000 0.16 Rc 1/4 6.35 143 20.0 200 M7 310761
  • Working air pressure: 0.6MPa
  • Overall length: Accessories and exhaust hose parts not included.
  • Weight: Accessories not included.
  • In the main body, a 1.5m air intake hose, exhaust hose and a hose joint are attached.
  • [OP] Should be replaced at our factory.
光滑表面研磨抛光用顶尖工具
Tip tool for Smooth Surface Grinding and Polishing
从制造金属模塑时去除刀具痕迹,达到镜面精加工的目的
To meet work objectives from the removal of cutter marks when manufacturing metal molding, to the finishing of mirror surfaces
No. HC-80 Headcup
Model No. Grit
#
Inner Ctn. EDP No.
HC-80 80 10 622205
No. RH-30 Rubber Holder
Model No. Inner Ctn. EDP No.
RH-30 10 622305
No. PR PO-Ring
Model No. Grit
#
Inner Ctn. EDP No.
PR-60 60 100622005
PR-100100100622007
PR-150150100622009
PR-240240100622011
PR-400400100622013
PR-600600100622015
No. LP Lap Ring
Model No. Grit
#
Inner Ctn. EDP No.
LP-320 320 30622105
一点注意
角附件更换头
Corner Attachment Replacement Heads
提供一系列具有不同头部形状和齿轮比的角部附件。
VESSEL将根据您的需求更换微型磨床头。
A selection of corner attachments with differing head shapes and gear ratioses is available.
VESSEL will replace the micro grinder heads in accordance with your needs.
replacement head
replacement head
 

气动带式砂光机 气动盘式砂光机 气动微型磨床(用于精密磨削)
带子宽度 12mm/10mm 带子宽度 20mm 带子宽度 30mm 圆盘直径 50mm 圆盘直径 100mm 弹簧夹头 Φ3mm 弹簧夹头 Φ6mm 表面磨削/抛光
紧凑轻巧 可以选择滚筒头。 可选择滚轮头 低速5000转/高扭矩 手持式强力磨床,追求安全性和实用性。 高转速和最小的芯偏差,实现轻松,平滑的磨削性能  
No. GT-BS12
No. GT-BS20
No. GT-BS30
No. GT-DS50A
No. GT-DG100
No. GT-MG75S
No. GT-MG55SAR
No. GT-MG25S
No. GT-MG25-12CF
 
No. GT-BS30W
No. GT-DS50B
 
No. GT-MG75SAR
No. GT-MG55S
No. GT-MG35SAR
No. GT-MG25-9CF
No. GT-MG55SR
No. GT-MG35-12CC